濟南微爾激光設備有限公司振動刀刀具調節問題解答

調刀和壓輪的偏移量1, 先把SP2的類型設置成[壓輪], 并且調好深度,2, 先按切換到[壓輪]。3, 然后按 【測試偏移】 按鈕測試，測試的時候是用震動刀割一個十字，然后用壓輪壓另一個十字，如果這兩個十字重合了，就說明偏移量調好了。4, 如果沒有重合，那么通過點動按鈕, 把壓輪的中心移到震動刀割的那個十字的中心就可以了，最后按按鈕保存，然后再按【測試偏移】按鈕重新測試看下兩個十字是否有完全重合。

如有更多問題詳解請致電咨詢，感謝您的觀看。

Solution to Tool Adjustment Problem of Vibrating Knife in Jinan Weier Laser Equipment Co., Ltd.

The offset of tool adjustment and press wheel is 1. First, the type of SP 2 is set to press wheel, and the depth is adjusted. Second, press switch to press wheel. 3. Then press the [Test Offset] button to test. The test is done by cutting one cross with a vibrating knife and pressing another cross with a press wheel. If the two crosses coincide, the offset is adjusted. 4. If there is no coincidence, then move the center of the wheel to the center of the cross cut by the vibrating knife by clicking the button. Finally, press the button to save, and then press the [test offset] button to re-test whether the two crosses are completely coincident.

If you have more questions, please call for consultation. Thank you for watching.

微爾廠家直銷振動刀切割機

濟南微爾激光設備有限公司主營激光切割機，旋轉刀切割機，振動刀切割機，木工雕刻機，光纖切割機等

微爾廠家直銷  振動刀切割機

技術參數資料：          

4、汽車內飾CAD/CAM解決方案

CAD設計排版軟件，超級排料優化排版，快速輸出；

對個性化的圖形，用戶設計完工后可添加圖形，增加圖庫量，以便隨時調用

快捷、高效、精準、省料、全面代替人工作業；

微爾數控設備提醒：如果現在你覺得參數已經設置正確了, 你想把當前參數備份一份, 那么你可以點[備份參數], 假設后來別人又改了很多參數, 改亂了, 你可以讀出備份, 用上次備份的參數覆蓋掉目前的參數, 要注意的是只能備份一份, 所以不要把不對的參數備份起來。

Weier CNC equipment warning: If you feel that the parameters have been set correctly, you want to copy the current parameters, then you can point to [backup parameters], assuming that others later changed a lot of parameters, changed the confusion, you can read out the backup, with the parameters of the last backup to cover the current parameters, it is important to note that only one backup, so do not backup the wrong parameters. Come on.