進口手動污水專用刀閘閥的分類-德國洛克品牌

 

一、進口手動污水專用刀閘閥產品性能：

1、公稱壓力：PN1.0～1.6Mpa

2、通徑范圍：DN50～DN2000

3、連接形式：對夾、梅花法蘭式、法蘭式等

4、傳動機構：手動

5、閘板材質：2Cr13、201、304、316、316L

6、主要材質: CF8

7、適用溫度：≤300℃

8、泄漏等級：硬密封：D級；軟密封：零泄漏

9、密封形式：H

10、填料密封：含油四氟盤根

11、適用介質：適用于礦山電廠的選煤、排渣、食品、造紙、醫藥、化工等管路上，接通或截?cái)喙苈分械乃酀{、金礦粉、礦砂、爐渣、煤泥、紙漿、木漿、尾礦、纖維、粉塵、化學品處理污水、沉淀池、瀝青、料倉出口等介質。

 

二、進口手動污水專用刀閘閥產品特點：

1、超短結構長度，節省材料，可使管路系統整體重量大大減輕；

2、占用有效空間小，能有效支持管道的強度，可減少管道振動的可能性；

3、閘板選用奧氏體不銹鋼，耐腐性能大大提高，可有效的防止由于閘板腐蝕引起的密封瀉漏；

4、上密封填料采用柔性PTFE，密封可靠、操作輕便靈活；

5、閘板具有閘刀的功能，能有效的閘斷介質中各類雜物。

 

三、進口手動污水專用刀閘閥產品概述：

德國《DE LOCKE》洛克進口手動污水專用刀閘閥吸取了國際先進技術和結構優點，彌補刀閘閥在使用中存在的不足，是一種具有輕型、結構簡單小巧、密封性能可靠、使用壽命長、具有切斷介質等優點，其密封原理是通過閘板在關閉到底時，閘板斜切面碰到閥體上的鍥塊使得閘板緊靠密封面起到密封效果，并且閘板底部的斜切面具有切斷介質的功能，使得閥門不易受介質的堵塞卡阻。其結構可以做成硬密封、軟密封，可以根據客戶對密封要求選型。

3、 Introduction of imported manual sewage special knife gate valve products:
German de The imported manual sewage special knife gate valve absorbs the advantages of international advanced technology and structure to make up for the shortcomings of knife gate valve in use. It has the advantages of light weight, simple and compact structure, reliable sealing performance, long service life, medium cutting and so on. Its sealing principle is that when the gate is closed to the end, the oblique section of the gate touches the wedge on the valve body to make the gate work smoothly The gate is close to the sealing surface to achieve sealing effect, and the inclined section at the bottom of the gate has the function of cutting off the medium, so that the valve is not easy to be blocked by the medium. Its structure can be made into hard seal and soft seal, and can be selected according to the sealing requirements of customers.
 

四、進口手動污水專用刀閘閥產品業績：

1、上海紡織(集團)有限公司

2、徐州盛泉洗煤廠

3、浙江華都紡織集團有限公司

4、恒安集團

5、金東紙業有限公司

6、山東晨鳴紙業集團股份有限公司

7、濰坊砂礦有限公司

8、華東有色尾礦公司

9、福建建陽祥康織造有限公司

10、介休市晉強洗煤設備制造有限公司

11、微山縣匯永煤炭洗選有限公司

12、山西臨汾如意洗煤有限公司

13、西湖洗煤廠

14、山東洗煤廠

4、 Performance of imported manual sewage special knife gate valve products:
1. Shanghai Textile (Group) Co., Ltd
2. Xuzhou Shengquan coal preparation plant
3. Zhejiang Huadu Textile Group Co., Ltd
4. Hengan Group
5. Jindong Paper Co., Ltd
6. Shandong Chenming Paper Group Co., Ltd
7. Weifang placer Co., Ltd
8. East China Nonferrous tailings company
9. Fujian Jianyang Xiangkang Weaving Co., Ltd
10. Jiexiu Jinqiang coal washing equipment manufacturing Co., Ltd
11. Weishan Huiyong coal washing Co., Ltd
12. Shanxi Linfen Ruyi coal preparation Co., Ltd
13. Xihu coal preparation plant
14. Shandong coal preparation plant
 

五、進口手動污水專用刀閘閥產品維護：

1、手輪、手柄及傳動機構均不允許作起吊用，并嚴禁碰撞。

2、雙閘板閘閥應垂直安裝（即閥桿處于垂直位置，手輪在頂部）。

3、帶有旁通閥的閘閥在開啟前應先打開旁通閥（以平衡進出口的壓差及減小開啟力）。

4、帶傳動機構的閘閥，按產品使用說明書的規定安裝。

5、如果閥門經常開關使用，每月至少潤滑一次。

5、 Imported manual sewage special knife gate valve product maintenance:
1. Hand wheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is strictly prohibited.
2. The double gate valve should be installed vertically (i.e. the stem is in the vertical position and the hand wheel is at the top).
3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between the inlet and outlet and reduce the opening force).
4. The gate valve with transmission mechanism shall be installed according to the product manual.
5. If the valve is used frequently, lubricate it at least once a month.